Fully compatible with Canon's 2.4 GHz radio flash trigger system and E-TTL/E-TTL II metering, the Yongnuo Speedlite YN600EX-RT Flash for Canon is a top of the line speedlight available for Canon users.
The YN600EX-RT can be used as a master flash with 600EX-RT’s from both Canon and Yongnuo, and can be used as an off-camera slave when controlled by another 600EX-RT, or transmitter Canon ST-E3-RT or Yongnuo YN-E3-RT (sold separately). The YN600EX-RT can also be used as an optically triggered slave, where it is compatible with both Nikon and Canon flash systems.
The YN600EX-RT features a powerful guide number of 60m at ISO 100 and 200mm, and an impressive zoom range of 20-200mm, along with a wide-angle panel for 14mm coverage on full-frame cameras. Bounce lighting is also possible with tilt from -7 to 90° and rotation left and right 180°.
In addition, it features TTL capabilities, high recycle time of about 3 seconds, high-speed sync, rear curtain sync, flash exposure bracketing, flash exposure compensation, large LCD display screen, standard PC Synchronous interface and many other useful settings. The YN600EX-RT runs on 4 AA batteries and can also be used with an external battery pack if needed.
- Fully compatible with Canon's 2.4 GHz radio flash trigger system and E-TTL/E-TTL II metering
- Functions as an optically triggered slave, compatible with both Nikon and Canon flash systems
- Guide number of 60m at ISO 100 and 200mm
- Impressive auto/manual zoom range of 20-200mm
- Bounce lighting with tilt from -7 to 90° and rotation left and right 180°
- Comprehensive features including 3 second recycle time, high-speed sync up to 1/8000s, rear curtain sync, flash exposure bracketing, flash exposure compensation
- Powered by 4 AA batteries or optional external battery pack
Fully compatible with Canon’s RT System
The YN600EX-RT can be used as an on-camera master unit, or remote slave unit of Canon’s RT system.
Supports wireless optical slave function
The YN600EX-RT supports Yongnuo, Canon and Nikon wireless optical master signals, and supports S1 and S2 pre flash cancel modes.
A host of functions
The YN600EX-RT has a high guide number of GN60. It supports can live-display flash groupings and recycling information. Other functions include remote TTL, manual flash, Gr grouping flash and high-speed sync of up to 1/8000s. The YN600EX-RT also supports auto and manual zooming. The flash coverage can be changed between AUTO and 20~200mm.
Supports USB firmware upgrade
The YN600EX-RT is equipped with a USB interface, and supports firmware upgrades. Users can download upgrade firmware through the Yongnuo official website.
Settings save automatically, supports custom settings
The parameters on the flash will automatically save when the flash is turned off. Users can customise settings and functions as needed.
|Guide no.||60 (ISO 100, 200mm)|
|Triggering mode||Camera Set-up, S1, S2, RX, TX|
|Vertical tilt angle||-7 - 90 degrees|
|Horizontal rotation angle||360 degrees|
|Power supply||4 x AAsize batteries (alkaline or Ni-MH)|
|No. of flashes||100 - 1500 times (AA alkaline cell used)|
|Recycle time||Approx. 3s (AA alkaline cell used)|
|Flash duration||1/200s - 1/20000s|
|Flash control||8 levels of output control (1/128 - 1/1), 29 levels of fine tuning|
|External interface||Hot shoe, PC port, external charging port|
|Wireless trigger distance||100m (2.4G wireless); 20-25m indoor, 10-15 outdoor (optical control)|
|Additional features||Flash head zoom, sound prompt, PC sync, power saving mode, overheating protection, save settings|
|Dimensions||62 x 214 x 78mm (extended)|
- Yongnuo Speedlite YN600EX-RT Flash for Canon
- Mini Stand
- Soft Case
- Instruction Manual