Rode NTG2 Multi-Powered Condenser Shotgun Microphone
100% Genuine Australian Stock
10-Year Rode Microphones Warranty (after registration)
The Rode NTG2 Multi-Powered Condenser Shotgun Microphone is a lightweight shotgun mic, designed for professional applications within the film, video, television and production industries.
- Broadcast sound quality
- Low noise circuitry
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- P48 phantom power or 1.5V AA battery option
- Low handling noise
- Low weight - 161g (5.17 oz.)
- Designed and manufactured in Australia
- Full 10 year warranty*
* Online registration required.
The Rode NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the NTG-2 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG-2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The Rode NTG-2 shotgun microphone is covered by RØDE Microphones' industry leading 10 year warranty.
|Acoustic Principle||Line Gradient|
|Active Electronics||JFET impedance convertor with balanced transformer output|
|Frequency Range||20Hz - 20kHz|
|Maximum SPL||131dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Maximum Output Level||6.9dBu (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||18dB-A|
|Power Options||+48V phantom power / AA Battery|
|Dimensions (H x W x D)||280 x 22 x 22mm|
|Output||3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)|
- Rode NTG-2 Multi-Powered Condenser Shotgun Microphone
- WSVM Wind Shield
- ZP2 Zip Pouch
- RM5 Mic Clip